Pixracer R15 Autopilot xracer PX4 Flight Controller For FPV Racing RC Drone

Get Pixracer R15 Autopilot xracer PX4 Flight Controller For FPV Racing RC Drone

Many people will mistakenly believe that the PixRacer is just a standard "racer" controller that lacks many of the functionalities of a complete autopilot system. Well, don't be fooled! PixRacer has all the capabilities of the original PixHawk -including version 2- and even more! But is optimized in size and has just about the right amount of input/outputs that allows you to switch from a full enriched autopilot stack system -with autolanding and full navigation- to a high-performance racing platform. Yup, if you get tired of advanced precision waypoints, then flip the switch and race like a pro! R15 has an updated accelerometer/gyro, magnetometer and is ROHS (Lead Free).

Includes an ESP8266 for easy WiFi Updates. Comes with the latest Ardupilot ESP8266 firmware developed by Andrew Tridge. This new firmware has a nice web interface, MavLink2 support and an easier way to do future updates via the web interface.

Specifications:

Microprocessor:

32-bit STM32F427 Cortex M4 core with FPU rev. 3

168 MHz/256 KB RAM/2 MB Flash

External Memory:

F-RAM Cypress MF25V02-G 256-Kbit nonvolatile memory (Flash memory that performs as fast as RAM)

SD Card slot with 8gb Micro SD card SanDisk. Adapter included

Sensors:

Invensense MPU-9250 3-axis accelerometer/gyroscope/magnetometer

MEAS MS5611 barometer

ST LIS3MDL magnetometer

Interfaces:

5x UART (serial ports), one high-power capable, 2x with HW flow control and GPS+I2C®

CAN

Spektrum DSM / DSM2 / DSM-X® Satellite compatible input up to DX9 and above.

Futaba S.BUS® & S.BUS2® compatible input

FRSky Telemetry port output

Graupner SUMD

Yuneec ST24

PPM sum input signal

OneShot PWM output (Configurable)

RSSI (PWM or voltage) input

I2C

SPI

External microUSB port

JTAG

Dronecode Debug connector

WiFi Telemetry & firmware update via ESP8266 (Included!)

6x PWM outputs

JST-GH connectors using Dronecode connector standard

Power System:

Ultra low noise LDO voltage regulators

Weight and Dimensions:

Weight: 10.54g (.37 oz)

Width: 36mm (1.42”)

Length: 36mm (1.42”)

Package include:
Pixracer R15 Flight controller x 1
CNC Aluminum alloy protective shell x 1
ESP8266 Wifi module x 1
Safety switcher x 1
Buzzer x 1
Micro SD Card x 1
SD Card reader x 1
Cables set x 1 (For Receiver, GPS, I2C ,Power module , Serial)

Click Here For Discussion.